SINGER 2210 Athena - Manual (Page 38)

To achieve even stitching and close to the
zipper teeth, use the special zipper foot,
♦ Wiien zipper teeth are to the left of the
needle, slide the adjusting block (1), which
slides on the pin of the foot, all the v/ay
to the right.
♦ Snap on foot with shank to the left side
of pin, (See “Changing Snap-on Presser
Feet")
« Hand‘baste the zipper opening to the
seam line (2), and press open the seam
allowance,
♦ Place open zipper face dov/n on the seam
allowance with the teeth against the seam
line.
♦ Stitcii the zipper to the seam allowance
from bottom to top on one side.
To stitch the other side of zipper (teeth to the
right of needle):
♦ Snap off foot and slide the adjusting
block (1) all tile way to the left. Then, snap
right side of pin onto shank as above*
• Sew other side of zipper to seam
allowance.
• Baste through the zipper tapes, seam
allowances, and garment exterior.
♦ Turn the garment right side up and
topstitch it to the zipper, sewing through
all layers.
It is suggested more in-depth instructions be
consulted since there are many ways to use
zippers in garments.
36