SINGER 2210 Athena - Manual (Page 31)

A
MÑc) ^ (
mrc
)
**
To use this button:
This button is used to recall patterns stored
in memory. If you have decided to sew a
single sequence of stored stitch patterns,
press the “MRC’' huUori once. The red Irv
dicator (A) will light. When the machine fin­
ishes to sew the string sequence, the slow
blinking of the red Indicator will advise you
to be at the end of the programmed siring
sequence and a lettering space symbol will
appear in the pattern display windov,?, (III. 8)
The machine v/lll automatically stop. To
restart machine, press “MRC” again to
repeat the same pattern or to select
another pattern.
To set the machine for continuous sevdng
of a
string
sequence, push the “MRC” but­
ton twice. The indicator light will begin
blinking rapidly. The machine will repeat
the pattern string continuosiy till it is
switched off.
Control
• After programming a sentence, a date,
or a sequence of different patterns, all
data stored In memory can bo verified
to be sure that no programming error
has been made. By pressing the “ENT“
button, all selected key numbers will ap­
pear one after the other in the display
window.
At the end of the stored sequence, the
machine
m\\
sound a beep signal. Push
the “MRC” button to return to the begin­
ning of the sequence. The machine Is
now ready to sev/.
Please note that by pressing the “MRC“
button once, the machine will
sew
only
one pattern sequence and will automat­
ically stop after this sequence Is com­
pleted.
By pressing “MRC” twice, the machine
will repeat the pattern string continu­
ously.
29