Programming length (confd) – SINGER 2210 Athena User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Programming Length (Confd)
to
\ /
Depress speed controller slowly to start
sewing rigtit side of buttonhole. When the
stitching reaches the rear mark or^ the
fabric (A), stop machine and press center
button (2). the symbol (b2) will appear.
Start sewing again to complete the left
side of the buttonhole.
♦ When stitching reaches starting line at
the front of the buttonhole (B), stop
machine and press center button (2) a se*
cond time. The symbol (b3) will appear.
The machine will complete the buttonf^ole
and automatically stop. The red indicator
(tO) will start to blink and the symbol (bh)
will appear to indicate that the buttonhole
IS stored Irr the memory.
Remove sample fabric from machine, cut
slit In buttonhole, and confirm size with
button.
40