Needle up/down control, Position is – SINGER 2210 Athena User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Needle Up/Down Control
The position, up or down, in which the
needle stops when the speed controller is
released can be selected using button (1) lo-
cated beneath the reverse stitching button.
When power is turned on, the needle will
automatically stop in the *‘up’' position
whenever speed controller is released.
With machine stopped, but pov/er on,
press button (1) until desired needle stop
ping
position is
selected. This selection
will remain in effect until changed by the
operator or machine is turned off.
If the “down" position is chosen and it is
desired that the needle be quickly posi
tioned “up", lightly tap the speed corv
troller. The needle will immediately posi
tion up. Hov/ever, after sewing, it will still
come to rest in the “dov/n" position when
the speed controller is released unless
changed by the operator using position
control (1).
27