Balancing the buttonhole – SINGER 5805 User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Balancing the
buttonhole
On some kinds of fabrics, there may be a
difference in the density of the stitches on the
right or the left side of the buttonhole.
This Is easily adjusted by turning the balance
knob (1), in the center of the stitch length
dial to balance the density of the stitching.
A very slight turn of the dial will produce a
noticeable change.
• If the stitches on the right side of the
buttonhole (I) are too open, turn the
balance dial slightly to the right, until the
density of the stitches increases.
• If the stitches on the left side of the buttonhole
(II) are too open, turn the balance slightly
to the left, until the density of the stitches
increases.
68