Straight stitching, Stitch width selector, Needle position selector – SINGER 5805 User Manual
Page 36: Stitch length selector, Straight stitching stitch width selector
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Straight stitching
Stitch width selector
Before you move the selectors to set your
machine for straight stitching, turn the hand
wheel toward you until needle is at its highest
point.
Straight stitching can be performed with
pattern selector in any position; stitch width
lever must be set at ( j ) only.
Needle position
selector
Needle Position Selector positions the needle
In left ( ^ ), center ( I ) or right ( ^ )
needle positions.
t
i
f
i
1
I
3
Stitch length selector
To adjust the length of your stitches, turn the
dial so that desired stitch length is positioned
under ( • ) symbol.
• To shorten stitch length, turn dial toward a
lower number.
• To lengthen stitch length, turn dial toward a
higher number.
0—5
1
34