Swapping between two parties, Holding a conference call – Nortel Networks NN42030-107 User Manual
Page 73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced functions
5. To resume the call, select Cancel.
Call swap
Switch between two different while you are engaged in a call.
Swapping between two parties
1. While a call is connected, select Feature.
2. Dial the number.
3. Select Hold & Call.
The call is placed on hold. The held call hears music, if configured on
the system.
4. When the second call answers, press Swap to alternate between the
two calls.
Speaker mode
Switch between the system speaker and the earpiece speaker.
While a call is connected, select Spkr On.
To switch a call from the system speaker to the earpiece speaker, select
Spkr Off.
Three-party conference
Hold three-party conferences using the MCC 3100.
Holding a conference call
1. While a call is connected, press Feature.
2. Dial the number that you want to add to the conference call.
3. Select Hold & Call.
The call is placed on hold. The held call hears music, if configured on
the system.
4. When the party answers, request permission to initiate the
conference call, and then press Conference.
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 73