Direct outbound mode, Call modes – Nortel Networks NN42030-107 User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced functions
Mobile to initiate calls from your desktop telephone, mobile device, or
home telephone; the people you call always see the same number.
WATCH THE VIDEO FÜ1
WATCH THE VIDEO ®
on making a call from your mobile phone
(www31 .nortel.com/webcast.cgi?id=7484)
on making a call from your home phone
(www31 .nortel.com/webcast.cgi?id=7485)
Call modes
Two call modes are available:
“Direct Outbound mode” on page 62
“Call-me-First mode” on page 63
To use both call modes, you must configure an Outgoing Call Service DN
in your MCC 3100 system settings. However, if you do not configure a
service number, you can only use the Call-me-First mode. For more
information, see “Owner Information settings” on page 44.
Direct Outbound mode
In Direct Outbound mode, initiate calls directly from your mobile device to
other parties through the enterprise telephony system. For more
information, see Figure 7 "Direct outbound mode.” on page 62.
Figure 7: Direct outbound mode.
NN42030-107 MC 3100 3.1 Standard 03.03
November 2009
62