Nortel Networks NN42030-107 - Manual (Page 70)

Advanced functions
calls even if the device is Personal Identification Number (PIN) locked.
The manner in which the calls are handled depends on how you have
configured your Call Screening:
• Call Screening Enabled: When an incoming call comes in, you
receive a pop up alert requesting that you accept or decline the call.
— If you click accept, your phone rings. If you do not answer the
call, the call goes to your cellular voice mail system.
— If you click decline, the call goes to your Enterprise voice mail
system.
• Call Screening Disabled: Incoming call handling depends on your
system configuration as configured by your system administrator.
— If cellular voicemail avoidance is enabled, you hear a prompt to
accept the call by pressing pound (#). If you press #, the call is
established. If you do not press #, the call goes to your Enterprise
voice mail system.
— If cellular voicemail avoidance is disabled, the incoming call rings.
If you do not answer the call, it may go to Enterprise voice mail or
it may go to cellular voicemail.
Note: Remember to check both voice mail systems for messages.
For more information on configuring Call Screening, see “Call settings”
on page 39.
Device handoff
Device handoff requires a Handoff key on your desktop telephone. If you
do not have this key configured, contact your system administrator.
The Communication Server 2100 does not support the Device handoff
feature.
Moving a call from the desktop telephone to the MCC 3100
You can move a call from your desktop telephone to the MCC 3100.
1. While a call is connected on the desktop telephone, press the
Handoff key.
2. Answer the call on the MCC 3100.
NN42030-107 MC 3100 3.1 Standard 03.03 November 2009 70