Using the mid-call features – Nortel Networks NN42030-107 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced functions
3. Hang up your desktop telephone.
Moving a call from the MCC 3100 to the desktop telephone
You can move a call from your MCC 3100 to your desktop telephone.
1. While a call is connected on the MCC 3100, press the Handoff key
on your desktop telephone.
2. If you have Station Control Password (SCPW) privacy protection
configured, enter the SCPW on your desktop telephone.
3. Disconnect from the call on your MCC 3100.
Using the Mid-Call features
While you are engaged in a voice call, use the following voice call
telephony features:
•
Call hold and retrieve: Places the current call on hold, and then
resumes it.
•
Mute: Mutes the current call so you can carry on a conversation
without being heard.
•
Transfer: Transfers the call to another party—either blind or
supervised.
•
Swap: Switch between two parties while you are engaged in a call.
•
Speaker mode: Switches call audio from the earpiece to the system
speaker.
•
Three-party conference: Creates an impromptu three-party
conference.
Call hold and retrieve
Place a call on hold and retrieve it while you are connected to the
network.
Placing a call on hold
While the call is connected, select Hold.
Held appears in the dialpad display.
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 71