Nortel Networks NN42030-107 - Manual (Page 50)

Operating your MCC 31 00 for Windows Mobile device
Exiting MCC 3100 for Windows Mobile
Under usual circumstances, there is no need to exit the MCC 3100. You
can leave the application running for the entire time that your device is
turned on. However you must exit before installing or upgrading from a
computer or if you are uninstalling the software.
To exit MCC 3100 for Windows Mobile, select Menu, Exit from any pane.
Logging on and logging off
You may wish to log off the system but leave the application running.
Once logged off, you can easily log on again.
Logging on
1. To log on, select Menu, Login.
The Login status indicator changes to Online.
Logging on while the MCC 3100 device is cradled
Depending on how Microsoft ActivSync is configured, you may lose
wireless network connectivity when you cradle your device. If this
happens, you can reestablish a connection by logging off and logging on
again. Your data traffic is then transmitted over the USB connection. To
reconnect to the wireless networks after uncradling your device, log off
and then log on.
You can change the settings that control network connectivity while the
device is cradled. For more information, see “Modifying the Microsoft
ActiveSync settings” on page 29.
NN42030-107 MC 3100 3.1 Standard 03.03 November 2009 50