Nortel Networks NN42030-107 - Manual (Page 42)

Configuring your MCC 3100 for Windows Mobile
Table 10: Call Settings pane fields
Field Description
Service Number The list of valid, regional service numbers for
Direct Outbound mode calling is downloaded
automatically from the MCG 3100 after your
initial configuration. You can select from the list
as specified by your administrator, or select the
number as tagged for your office or region.
Note: To use Direct Outbound mode, your
cellular caller ID must be publicly visible.
Instant Conf
Reminder Period
(sec)
Program the Instant Conference reminder period
in seconds. This parameter controls how often
the MCC 3100 for Windows Mobile prompts you
to join a conference after you receive the initial
invitation and selected Join Later.
Auto Answer
Mode
Use the select box controls to specify how your
incoming calls are handled:
• Auto Answer Off (default): If auto answer or
call screening is off, you must manually
answer your call on the native phone of the
device.
• Auto Answer On: If both auto answer and
call screening are on, calls that you accept
on the local device are automatically
answered by the native phone. A missed call
record may appear in the native dialer.
Call Intercept • On (default): All calls placed from the device
(from the native dialer or the MCC 3100) are
routed through the MCG 3100. Your
Enterprise calling line identification will be
viewed by the other party.
• Off: Calls placed from the native dialer are
not routed through the MCG 3100. Your cell
phone number will be viewed by the other
party.
NN42030-107 MC 3100 3.1 Standard 03.03 November 2009 42