Nortel Networks NN42030-107 - Manual (Page 35)

Configuring your MCC 3100 for Windows Mobile
Table 8: Required parameters
Parameter Description
Mobile Phone Enter your mobile phone number or accept the
Number default value.
Recommended number format:
+XX YYY ZZZ ZZZZ
Where:
+ = International access code
XX = County code
YYY = Area code
ZZZ ZZZZ = Local number
Include the international access code (+) and
country code (1) only if you are directed to by your
system administrator.
Your mobile phone number is your default contact
number for both outgoing and incoming calls. If you
want to use another number for this purpose, such
as your home or office number, you must configure
it on the Owner information screen (see “Owner
Information settings” on page 44).
5. Click Done.
The MCC 3100 logs on to the system.
— If logon is successful, the remainder of your configuration settings
are automatically downloaded and you can begin using the
MCC 3100. The next time you log on, you will go directly to the
Main pane.
— If logon is unsuccessful, the Login information panel remains in
focus, so that you can check your settings.
Note 1: If you are using a GSM device, your service provider may
require you to configure an Access Point Name (APN), username and
password under Connections.
Note 2: Before updating the Login Information panel, you must first
log out of the system. For more information about logging off, see
“Logging on and logging off” on page 50.
Nortel Mobile Communication Client 3100 for Windows Mobile User Guide 35