Viconics VWZS Integration Guide - Manual (Page 68)

68
VT73xxX Integration – Graphical User Interface (GUI) Objects
The following objects should be typically used in a GUI:
 Room Temperature (Numeric);
 Occupied and Unoccupied Heat Setpoints (Numeric);
 Occupied and Unoccupied Cool Setpoints (Numeric);
 Room Humidity (Numeric) (If available);
 Room Humidity Setpoint (Numeric) (If available);
 Outdoor Temperature (Numeric);
 Supply Temperature (Numeric) (If available);
 Occupancy Command (Enum);
 System Mode (Enum);
 Fan Mode (Enum);
 Fan Status (Enum);
 Heating Valve Status (Enum);
 Cooling Valve Status (Enum);
 PI Heating Demand (Numeric)
 PI Cooling Demand (Numeric)
 Window Alarm (Boolean);
 Filter Alarm (Boolean);
 Service Alarm (Boolean);