Viconics VWZS Integration Guide - Manual (Page 10)

10

Yellow device / node / controller have given out its 6 addresses to other devices in
building A.

Building B devices / nodes / controllers can only be connected through blue device /
nodes / controller due to maximum distance coverage.
Result:

Orange devices / nodes / controllers cannot join the ZigBee network.
Workaround to get orphan devices on the network:

Disconnect & bring one of building B device / node / controller & power it up in building
A until it joins the ZigBee network ( confirmed either at the Jace – coordinator or using
the status LED on the wireless communication card of the device / node / controller.

When the device / node / controller has joined the network in building A and is added to
the Niagara database, bring it back into building B so it can propagate ZigBee
addresses to the other devices in building B.