Viconics VTR8300 Line Voltage User Interface Guide - Manual (Page 28)

VTR8300 Series 28 User Interface Guide
Viconics Technologies Inc. I Small Building Systems I 9245 Langelier Blvd. Saint-Leonard, Quebec, Canada, H1P 3K9 I +1 514 321 5660 I www.viconics.com
028-6045-01 April 2014
© 2
01
4 V
ic
on
ic
s T
ec
hn
ol
og
ie
s. A
ll r
ig
ht
s r
es
er
ve
d
.
DISPLAY SETTINGS (CONT'D)
Configuration parameters
default value
Significance and adjustments
Language
Default value = English
Select language for main display.
Choices: English, French, Spanish, Chinese.
°C or °F
Default value = °C
This sets the default value when the Terminal Equipment Controller powers
up.
°C for Celsius scale.
°F for Fahrenheit scale.
Low backLight
Default value is 60%
Set the display’s backlight intensity after 2 minutes of keyboard inactivity.
Adjustable from: 0 to 100%.
Night backLight
Default value = 5%
Set the display’s backlight intensity after 2 minutes of keyboard inactivity.
Adjustable from: 0 to 100%.
(This parameter is only available for models with motion/light detectors.
The screen backlight will progessively decrease down to this setting when
room is dark).
RH display
Default value = Disabled
Enables the display of humidity below the room temperature on the display
(On): Display %RH.
(Off): Do not display %RH.
(Only available on models with humidity sensor).
PARAMETER DETAILS
5%
2/2 Display
Low backlight
Units
Language English
Night backlight
°C
60%
Disabled RH display
Parameter only displayed on
models with built in humidity
sensor.