VACUUBRAND PC 3012 VARIO plastic housing - Manual (Page 93)

page 93 of 129
Conversion of VACUUBRAND valves with DIN plug to
VACUUBRAND valves with VACUU•BUS plug:
Modification kit for small flange KF DN 16 at inlet ....................................699939
Hose nozzle for tubing I.D. 1/4” / 3/8” (6/10 mm), for inlet ........................636635
Elbow piece (90°) for PTFE tubing* for assembly at inlet ..........................637873
PTFE tubing* (sold by meter) .......................................................................638644
Ways to connect pumping units PC 300x VARIO:
VACUUBRAND-valve with DIN
plug
Conversion kit valve cable with
VACUU•BUS plug
Coolant valve VKW, 24 V= (676013) 612567
Venting valve VBM, 24 V= (666817) 612554
Vacuum distribution:
The VACUU•LAN ® modules allow process-ori-
ented, flexible and cost effective connections
according to your requirements. One vacuum
pump can support several workstations. Con-
tact VACUUBRAND for details.
For additional accessories such as vacuum valves, small-flange components,
vacuum gauges or vacuum controllers refer to www.vacuubrand.com.
VCL 01
VCL-B 10
VCL 02
VCL-B 11
VACUU•LAN ® manual flow control module VCL 01 ..................................677106
VACUU•LAN ® shut off / manual flow control module VCL 02 677107
VACUU•LAN ® automatic control module VCL-B 10 ..................................677208
VACUU•LAN ® manual flow control/
automatic control module VCL-B 11 ..........................................................677209
On this page we offer only a small selection of VACUU•LAN ® options. Please contact VACUUBRAND for further
information. Listed modules are designed for surface-mounted installation. Different catalog numbers are used for
modules designed for flush-mounting with concealed tubing.
* PTFE tubing DN 10/8 mm
VACUU•LAN ® networks are engineered to perform to specification when installed
with PTFE tubing, DN 10/8 mm. All VACUU•LAN ® modules, pumps and connectors
are designed for compatibility with this tubing.