VACUUBRAND PC 3012 VARIO plastic housing User Manual
Page 120
page 120 of 129
➨
Loosen the red union nut at the condenser. Remove hose from the
inlet of the condenser.
➨
Pull off old overpressure safety relief device and install new one.
➨
Connect hose to the inlet of the exhaust waste vapor condenser and
tighten union nut.
Replacing the overpressure safety relief device at the ex-
haust waste vapor condenser:
Overpressure safety relief device of waste vapor condenser....................638821
This manual is related to the following products: