Notice – VACUUBRAND PC 3012 VARIO plastic housing User Manual
Page 23
page 23 of 129
+
Take adequate precautions to protect people from the
effects of dangerous substances if contamination has
occurred. Use appropriate protective clothing, safety
goggles and protective gloves.
+
Wear parts have to be replaced regularly.
+
Never operate a defective or damaged pump.
+
Vent the pump before starting maintenance. Isolate
the pump and other components from the vacuum sys-
tem. Allow sufficient cooling of the pump. Separate the
pump from the coolant circuit and drain condensate, if
applicable.
Ensure that
maintenance is done only by suitably trained
and supervised technicians. Ensure that the maintenance
technician is familiar with the safety procedures, which re-
late to the products processed by the pumping system.
Only dismantle the pump as far as necessary.
NOTICE