Tuffy Security 066 - Manual

Page 1 of 5 - 8/18/2011 – Rev122006
INSTALLATION INSTRUCTIONS
TJ Speaker / Storage Security Console #066
Please read and fill out the enclosed warranty registration card to activate your warranty.
SHIPMENT CONTENTS
Console Front Shift Lever Console Rear Mounting Bracket
Shipping Package
(2) #10 Washers (6) 5/16” Narrow Washers (2) 10-32 Locknuts (2) 5/16 Locknuts
(4) 6-32 x 5/8” Screws (2) 10-32x1/2 Screws
(3) 8 x 5/8 Phillips Screws (2) 8 x 1 ¼” Phillips Screws
(3) 1/4 x ¾” Tapping Screws
(2) ¼-20 x ½” Screws (2 ) 5/16-18 x ½” Bolts (2) 5/16-18 X 1 ¼” Bolts
Shift Boot Plate
Front Console (1) 6 Speed Shifter Neoprene seal
Tray Bracket
Tools Needed
(1) ½” wrench or ratchet, socket, and extension
(1) ½” wrench
(1) 3/8” wrench or ratchet, socket, and extension
(1) 3/8” socket bit for drill (Used to insert Tapping screws, OPTION: Hole can be predrilled and the bolt could be
fastened using a wrench, or socket and ratchet)
(1) 5/16” Wrench
T-25 Torx
Phillips head screwdriver
3/8” drill bit
Electric drill
Silicone sealant (not necessary but recommended)
T-30 Torx (2005 or newer Jeep)
10mm Wrench (2005 or newer Jeep)