Tuffy Security 062 - Manual (Page 3)

Page 3 of 4 - 1/28/2008 – Rev122006
12. Turn the lock key so that it is in the unlocked position (The keyhole slot will be horizontal or right to left). Fasten the
hook cam back to the camlock. Make sure the hook is facing the proper direction. (See Figure 2)
FIGURE 2
13. Apply rubber seal around the rim of the steel lid.
14. Insert the new steel box into the plastic console and fasten it through the (4) old rivet holes with (2) ¼-20 x ¾” screws
in front and (2) ¼-20 x 1 ½” screws in the back. It may be easier to install the screws after enlarging the rivet holes
with a 5/16” drill bit. Do not overtighten screws.
15. Install the lock bracket to the box using (1) 3/8-16 x 1 ½” bolt, nut, and (2) washers. Position lock bracket correctly.
Do not overtighten. (See Figure 3)
16. Mount the lid to the new metal box using (2) ¼-20 x ½” screws and washers.