Top Flite TOPA0215 - Manual (Page 3)

- 3 -
NOTE: We, as the kit manufacturer, provide you
with a top quality kit and great instructions, but
ultimately the quality and flyability of your finished
model depends on how you build it; therefore, we
cannot in any way guarantee the performance of
your completed model, and no representations
are expressed or implied as to the performance or
safety of your completed model.
Remember: Take your time and follow the
instructions to end up with a well-built model
that is straight and true.
Before starting to build, compare the parts in this kit
with the Parts List, and note any missing parts. Also
inspect all parts to make sure they are of acceptable
quality. If any parts are missing, broken or defective,
or if you have any questions about building or flying
this airplane, please call us at (217) 398-8970, or
e-mail us at [email protected]. If you
are contacting us for replacement parts, please be
sure to provide the full kit name (Top Flite Elder)
and the part numbers as listed in the Parts List.
If you have not flown a model before, we recommend
that you get the assistance of an experienced pilot in
your R/C club for your first flights. If you’re not a
member of a club, your local hobby shop has
information about clubs in your area whose
membership includes experienced pilots.
In addition to joining an R/C club, we strongly
recommend you join the AMA (Academy of Model
Aeronautics). AMA membership is required to fly at
AMA sanctioned clubs. There are over 2,500 AMA
chartered clubs across the country. Among other
benefits, the AMA provides insurance to its members
who fly at sanctioned sites and events. Additionally,
training programs and instructors are available at
AMA club sites to help you get started the right way.
Contact the AMA at the following address or toll-free
phone number.
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302-9252
Tele. (800) 435-9262
Fax (765) 741-0057
Or via the Internet at: http://www.modelaircraft.org
ADDITIONAL ITEMS REQUIRED
Hardware and Accessories
This is the list of hardware and accessories required
to finish the Top Flite Elder. Order numbers are
provided in parentheses.
❏ Engine - .40 - .46 [6.5 – 7.5cc ] 2-stroke
.52 [8.5cc ] 4-stroke
❏ Radio - Four channel radio with four,
40 oz.-in. servos.
❏ Wheels – Two 3-3/4" Wheels. Williams Brother
Vintage Wheels (WBRQ1306)
❏ Spinner Great Planes Brass Spinner Nut –
choose for your engine shaft size.
❏ Propellers - Choose prop appropriate for
your engine
❏ Fuel line - Standard 3' tubing (GPMQ4131)
❏ Fuel tank - 10 oz (SULQ1385)
❏ MonoKote - For color scheme on the box:
❏ 2 - Six foot rolls “Cream” (TOPQ0212)
❏ 1 – Six foot roll “Red” (TOPQ0201)
❏ 1 – Six foot roll “Insignia Blue”(TOPQ0207)
Adhesives and Building Supplies
In addition to common household tools (screw drivers,
drill, etc.), this is the “short list” of the most important
items required to build the Top Flite Elder. We
recommend Great Planes Pro™ CA and Epoxy glue.
❏ 1 oz. Thin Pro CA (GPMR6002)
❏ 1 oz. Medium Pro CA+ (GPMR6008)
❏ CA Accelerator (GPMR6034)
❏ 6-Minute Epoxy (GPMR6045)
❏ 30-Minute Epoxy (GPMR6047)
❏ R/C-56 Canopy Glue (JOZR5007)
❏ Hobby knife (RMXR6907)
❏ #11 blades (RMXR6930)
❏ Small T-pins (HCAR5100)
❏ Builder’s triangle (HCAR0480)
❏ Electric drill
❏ Small Phillips and flat blade screwdrivers.
❏ Pliers with wire cutter (HCAR0630)
❏ Great Planes Plan Protector (GPMR6167) or
wax paper
❏ Sanding tools and sandpaper assortment (see
Easy-Touch ™ Bar Sander section)
❏ Sealing Iron (TOPR2100)
❏ Small torch or 40 watt soldering iron
Optional Supplies and Tools
Here is a list of optional tools mentioned in the
manual that will help you build the Top Flite Elder.
❏ Great Planes CG Machine ™ (GPMR2400)
❏ Top Flite Precision Magnetic Prop Balancer ™
(TOPQ5700)
❏ Top Flite Hot Sock ™ iron cover (TOPR2175)
❏ Straightedge with scale (HCAR0475)
❏ Cutting mat (HCAR0456)
❏ Masking Tape (GPMR1010)
❏ CA Debonder (GPMR6039)