Toa C-CC774 - Manual (Page 15)

15
1. BEFORE SETTING
1.1. Address Display When Turning Power On
When the camera’s power is turned on, the camera performs the initial operation (initializing operation) and
simultaneously the camera address appears on the monitor. After the completion of initial operation and peripheral
device connections, the camera can be controlled and the camera address screen will disappear.
Notes
• In the place of “***”, a camera address such as “001” will be
displayed.
The area on the screen at right will flash.
• The alphabets and numeral appearing in the place of “*****
- *****” of the screen are for maintenance, not the indication
caused by equipment failure.
1.2. Keys used to Settings
Settings can be performed by the equipment itself to be controlled or from the remote controller connected to the
equipment.
Use the joystick and each key on the C-RM500.
[ C-RM500 Top ]
HOW TO SETTING
XXXXXXXO XXXXXXX XXOXX
38400BPS
CAMERA ADDRESS***
P-NTSC
*****-*****
Menu start switch Menu start switch
Numerical keypad
Set key Clear key Joystick Focus key Zoom key
Camera address screen