Toa C-CC774 - Manual (Page 13)

13
REFRESH OFF /EVERY/SUN-SAT
If the camera is used for long uninterrupted periods of time, the camera
position may deviate when the position is played back. In such cases,
deviation can be corrected using the auto-refresh function. Also, if the
camera’s horizontal rotation contacts get dirty, the displayed image may
become distorted or manual horizontal rotation interrupted. In such cases,
the auto-refresh function cleans horizontal rotation contacts periodically.
OFF : Not refreshed.
EVERY : Refreshes at set time each day.
SUN-SAT : Refreshes at set time and day each week.
PASSWORD ON /OFF/SET
Set the password to be required when activating Maintenance menu
screen.
ON : When “ON” is selected, the Password Setting screen will be displayed
when displaying the Maintenance screen.
OFF: The selection of “OFF” will establish no password required when
entering the Maintenance screen.
SET: Displays the Password setting screen.
MOTOR POWER OFF /ON
When the preset camera position frequently deviates from its original
position, the symptom may be improved by setting the Motor Power to ON.
FACTORY PRESET NO /YES Used to return all settings to initial status set by the factory.
AUTO ADJUST OFF1 /OFF2/ON1/ON2
Positional deviation can be set to be automatically corrected when it occurs.
Perform correction when the camera has rotated to some degree of
deviation.
OFF1: No automatic correction.
OFF2: Displays a circle indication at the upper center of the screen if
positional deviation is detected.
ON1 : Automatically corrects positional deviation.
ON2 : Displays a circle indication at the upper center of the screen if
positional deviation is detected, and deletes the indicator when deviation is
corrected.
DATA BACKUP
MAIN→BACKUP /
MAIN←BACKUP
Setting data can be transferred to or read out from the backup memory.
However, data cannot be backed up for Privacy Masking, alarm logs, date,
and time. When setting data has been transferred from the backup memory
to the main memory during repair or replacement of equipment, set the
preset memory again. Since each camera’s basic information is backed up
in preset memory, preset positions can deviate if the data is transferred to
another camera.
MOTION
DETECTION
(*1)
1POS /2POS/254POS/255POS
When any movement is detected within the set area, preset positions can
be played back, the tour sequence is called up, or the contact opened and
closed. This function is not a dedicated device for prevention of fire, etc. TOA
takes no responsibility for any incidental loss or accidents. While the motion
detection function is operating, certain other functions (slow shutter, day &
night, Privacy Masking) cannot be used.