Toa DP-K1 - Manual (Page 42)

42
(8) Table indication button
The filter control area is displayed in tabular form if this button is pressed. To return the screen to the
original graphical display, press this button again.
(9) Frequency response indication button
Used to show or hide the Response View (see p. 46 ).
(10) Scale change button
If you press this button, a dialog for scale setting is displayed,
enabling you to change the graph scale of the filter control.
9.10.2. Time correction settings between Xover boxes
If you click the [Driver Alignment] tab, the setting screen for time correction between Xover boxes is displayed.
(1) (2)
(3)
(4)
(5)
(6)
(1) Minimum variation unit selection button [Increments]
Selects the minimum units of the delay time that can be changed with the Up and Down buttons.
(2) Option button
If you press this button, a delay option dialog is displayed and you
can select the unit of distance displayed on the delay distance
indication button from meters, inches and feet.
You can also set the temperature on the basis of which the delay
distance displayed is calculated.