Toa DP-K1 - Manual (Page 14)

14
Step 3. Select the input, output, and control modules.
3-1. Creating a new Unit configuration.
Select "Create New," and then modules from the pull-down menu.
(In initial status, "Create New" is selected, and all module column boxes are left "Blank.")
After selection completion, proceed to Step 4 by pressing the [Next] button, which becomes active
only when at least an input or output module is selected.
3-2. Recalling a Unit configuration from the stored template.
Select "Create from Template" and press the [Click Here] button displayed in the File Path field. A
dialog box for selecting the file is then displayed. If you select the file and press the [Finish] button,
the signal flow (see
p. 17 ) is displayed.