Toa DP-K1 User Manual
Page 39
39
(13) Frequency response indication button
Used to show or hide the Response View (see
(14) Measurement viewer button
Permits the ARC Measurement View (see
(15) Subtle button
Provides subtle filtering.
This button works on the filter automatically created by the ARC measurement.
Once the filter curve is manually changed, this button does not operate any more.
(16) Normal button
Provides normal filtering (default after measurement).
This button works on the filter automatically created by the ARC measurement.
Once the filter curve is manually changed, this button does not operate any more.
(17) Aggressive button
Provides aggressive filtering.
This button works on the filter automatically created by the ARC measurement.
Once the filter curve is manually changed, this button does not operate any more.
(18) Default Select button (Selected)
Reverts only the filter point being selected to the default normal value that has been automatically
created.
This button is only enabled while the filter setting is manually changed.
(19) Default all button (All)
Reverts all the filter points to the default normal value that has been automatically created.
This button is only enabled while the filter setting is manually changed.
Scale... :
Scale can be changed.
Q-Display:
The method to indicate the Q value can be changed by selecting "Value" or "Octave
Band." (Available only when the parametric equalizer, notch filter or all-pass filter is
selected.)
"Fraction" and "Value" displays are available for the "Octave Band" display.
Fine Resolution: Selection of "Frequency" permits the frequency step width to be changed. If "Gain" is
selected, the gain step width can be changed.
(12) Option button
The following pull-down menu is displayed if you press this button.