Solvline SerialGate - Manual (Page 91)

SerialGate User Guide
91
System
Update device server firmware, initialize the system or command port reset.
In order to select System, press ‘ESC’ on the panel until ‘Main Menu’ comes up, and if ‘Main Manu’ is
displayed, press ‘<<’ or ‘>>’ until you see ‘System’. Then, press ‘Enter’ to change the details.
At any time ‘ESC’ is selected, it moves to the top menu.
Menu Option Default Description
Port Reset
Cancel Yes Cancel
<<, >> : Select option.
Enter : If Cancel is selected, it moves to the
next menu. If Yes is selected, that action is
performed.
Factory Default
Reboot System
Firmware Update
Port Reset
If ‘yes’ is selected in Port Reset, LCD displays the port number from 1 to 16 as below, and the cursor is
at the first one.
P o r t R e s e t
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6
Move the cursor to the port to be reset using ‘<<’, ‘>>’ keys and press ‘Enter’. Then, the corresponding
port will be reset.
Factory Default
Cancel and Yes are selectable with ‘<<’, ‘>>’ keys. If a user selects ‘Yes’ and ‘Enter’ in turn,
configuration resets to the factory default.
Reboot System
Cancel and Yes are selectable with ‘<<’, ‘>>’ keys. If a user selects ‘Yes’ and ‘Enter’ in turn, it prints out
‘Now Rebooting’ message and reboots the device server.
Firmware update
Update device server’s firmware. (OS, Filesystem)
In order to perform this feature, TFTP server and firmware image files should be prepared in PC.
Cancel and Yes are selectable with ‘<<’, ‘>>’ keys. If a user selects ‘Yes’ and ‘Enter’ in turn, it starts