Solvline SerialGate - Manual (Page 79)

SerialGate User Guide
79
Ch6 Configuration via Telnet
Connection
Open your telnet client program and enter SerialGate’s IP address to connect. You need to enter
appropriate username and password to login. Please note that this username and password is used as
authentication method for Web as well. This means if username or/and password has been modified
from the telnet interface, modified values have to be entered to connect to web, and vice versa.
Factory default username : serialgate
Factory default password : 99999999
[def] commands - you can configure SerialGate’s settings.
[def help] commands - you can view current SerialGate’s settings.
After changing values, you can see modified values with ‘set view’ commands. But, be careful
because these values are not in effect unless you issue a ‘def save’ command. Changes will be
discarded if you do not save current settings.