Solvline SerialGate - Manual (Page 73)

SerialGate User Guide
73
Menu Default Descriptions
SNMP
v1/v2/v3
Agent
Disable
Enable or disable Simple Network Management Protocol (SNMP)
support. (Options : Disable/Enable)
V1/2
Attribution
ReadOnly
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite". (Options : ReadOnly/ ReadWrite)
V3 Attribution ReadOnly
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite". (Options : ReadOnly/ ReadWrite)
V3 Username/
Password
serialgate
/administr
ator
Configure the Username and the password when use SNMP V3.
The Password is at least 8 character string
TRAP IP/ Port
0.0.0.0/16
2
Configure the server IP address and Port which receive the TRAP
information.
System reset
notification
Enable
If Enable is selected, notify the “System reset info.”
(Option : Enable, Disable)
Port connect
notification
Disable
If Enable is selected, notify the “Serial Port opened info.”
(Option : Enable, Disable)
Port
disconnect
notification
Disable
If Enable is selected, notify the
“Serial Port Closed info.”
(Option : Enable, Disable)