Solvline SerialGate - Manual (Page 24)

SerialGate User Guide
24

LAN port: 8-pin RJ45 jack connects SerialGate to networking devices such as Ethernet
card, hub, and router.
SG-1020/232, Combo LED / RESET
LED Status Meaning
PWR
(Red)
On Power supplied to the device
Off No power supplied to the device
LAN
(Green)
Off No active network connection
On Network activated
RDY
(Red)
Blink Normal operation
On System Booting
Off System Error
RS-422 On Serial port set to RS-422 mode (Combo model)
RS-485 On Serial port set to RS-485 mode (Combo model)
Serial Tx/Rx
Green Blink Serial data transmitted
Orange Blink Serial data received
LAN Port
(Right Orange)
On Network connected
Off Network disconnected
Blink LAN data being transmitted
LAN Port
(Left Green)
On 100baseT connection detected & LAN data transferred
Off 10baseT connection detected & LAN data transferred
< Reset button features >
Operation Result
Pressed for less than 3 seconds Restart SerialGate
Pressed for more than 3 seconds
Restore factory default settings of SerialGate, and the
device will automatically reboot.