Solvline SerialGate - Manual (Page 89)

SerialGate User Guide
89
Port Setup
Change the operating environment setting for each port.
In order to select Port Setup, press ‘ESC’ on the panel until ‘Main Menu’ comes up, and if ‘Main Manu’
is displayed, press ‘<<’ or ‘>>’ until you see ‘Port Setup’. Then, press ‘Enter’ to change the details.
At anytime ‘ESC’ is selected, it moves to the top menu and asks if a user wants to save the change in
Flash memory in case of a change made.
For more details about each menu, please refer to Chapter 5 “Configuration via Web” and Chapter 6
“Configuration via Telnet.”
Menu and selectable options are as follows.
Menu Option Default Description
Protocol
Disable
Com_redirector
TCP_Server
TCP_Client
TCP_Broadcast
TCP_Multiplex
UDP_Server
UDP_Client
Pair_Master
Pair_Slave
Com_Redirector
<<, >> : Select option
Enter: Save the current option, and go to
the next menu.
Socket No. 4001 ~ 4016
4000 + Port
number
<<: Increase the value of the cursor
position.
>>: Move cursor to the next space.
Enter : Save the current option,
and go to the next menu.
Interface
RS232,
RS422
RS485 (NE)
RS485(E)
RS232
<<, >> : Select option
Enter: Save the current option, and go to
the next menu.
Device Type
Data Only,
Modem
Data Only
BaudRate 150 ~ 921600 bps 9600
Parity None, Odd, Even None
Data Bits 5 ~ 8 8