Solvline SerialGate - Manual (Page 50)

SerialGate User Guide
50
SNMP Settings (210MHz Model Only)
A user can set the communication and operation environment for the SNMP Agent. After changing
values, you need to click ‘Submit’ button. Then you will see the same page with modified values.
Please note that you have to ‘Save & Reboot’ in order to see these changes in effect. Changes will be
discarded if you do not save current settings.
In order to use the SNMP Agent, enable SNMP v1/v2/v3 and click the [Submit] button.
Menu Default Descriptions
SNMP
v1/v2/v3
Agent
Disable
Enable or disable Simple Network Management Protocol (SNMP)
support. (Options : Disable/Enable)
V1/2
Attribution
ReadOnly
SNMP V1/2 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite". (Options : ReadOnly/ ReadWrite)
V3 Attribution ReadOnly
SNMP V3 Attributes can read and write by SNMP Agent.
In order to read attributes only, change the feature to "ReadOnly".
In order to read and write attributes, change the feature to
"ReadWrite". (Options : ReadOnly/ ReadWrite)