Configuration via lcd, Lcd and key operation, Ch7 configuration via lcd – Solvline SerialGate User Manual
Page 86
SerialGate User Guide
86
Ch7 Configuration via LCD
This feature is only for SG-1160/ALL model. A user of SG-1010/1020/1040/1080 does not need to read
this chapter.
Through the LCD on the front panel, a user is able to test operation of each interface and configuration.
By default, the LCD displays communication status of each port, and by operating the keys next to the
LCD, the interface can be tested.
LCD and Key Operation
Port Status
---------------
ESC Enter
Graphic LCD is 16 Character * 2 Line, and four keys are to configure the operating environment.
The function of each key is as follows.
Key
Function 1
Function 2
ESC
Go to the top menu.
Enter
Select the current value, and then go to the next menu
Previous menu/item
If the variable is numeric, it increases the value
Ex.) 192.168.
0
.111 192.168.
1
.111
Next menu/item
If the variable is numeric, move to the next space
Ex.) 192.168.
0
.111 192.168.0.
1
11