Reznor BE Unit Installation Manual - Manual (Page 2)

Form RZ-NA-I-FE/BE, Mfg P/N 98807 Rev 10, Page 1
Index by Page
Belt Tension ............................................. 17
Blower/Filter Cabinet (Optional) ............ 23
Blower Motor .......................................... 17
Blower Rotation ...................................... 18
Blower Speed Adjustment ....................... 17
Bottom Access ......................................... 24
Burners .............................................. 19, 24
Burner Air Adjustment ............................ 19
Burner Rack Removal .............................. 24
Carryover, Flash ...................................... 25
Check Installation and Start-Up .............. 20
Clearances .................................................. 6
Combustion Air Proving Switch .............. 19
Combustion Air ......................................... 6
Confined Space Installation ....................... 6
Dimensions ................................................ 3
Disconnect Switch ................................... 12
Duct Flange (Blower Model Option) ...... 21
Electrical Supply and Connections .......... 12
Fan Blade ................................................. 25 Index by Page
Fan Control ........................................ 18, 26
Fan Motor ............................................... 17
Gas Piping and Pressures ........................ 10
Guard Options (Blower Model) .............. 22
Hanger Kits (Optional) .............................. 7
Hazard Intensity Levels ............................ 2
Heat Exchanger ........................................ 25
High Altitude Combustion Air
Pressure Switch .......................... 5, 11
High Altitude Operation ............................ 5
Ignition System .................................. 19, 25
Installation Codes ...................................... 2
Limit Control ..................................... 18, 26
Location (Heater) ....................................... 5
Louvers, Vertical (Optional) .................... 21
Maintenance ............................................ 23
Maintenance Schedule ............................. 23
Manifold Pressure ................................... 11
Multiple Heater Control Option ............. 23
Index by Page
Nozzles, Downturn Air (Optional) ......... 21
Optional Equipment ................................ 20
Operating Sequence ................................. 19
Orifices, Burner and Pilot ........................ 25
Pilot ................................................... 19, 25
Polytube Adapter (Blower Model
Option) .......................................... 21
Service ...................................................... 23
Spark Gap ................................................ 25
Suspending the Heater ............................... 6
Thermostat and Connections ................... 12
Troubleshooting ....................................... 27
Uncrating and Preparation ......................... 2
Valve, Gas .......................................... 19, 26
Venter Motor and Relay .......................... 26
Venting ................................................. 8, 25
Warranty .................................................... 2
Wiring Diagrams ................................. 13-16
GENERAL
I nstallation should be done by a
qualified agency in accordance with
the instructions in this manual and
in compliance with all codes and re-
quirements of authorities having ju-
risdiction. The instructions in this
manual apply to the unit heater mod-
els listed below.
WARNING: Improper installation, adjustment,
alteration, service, or maintenance can cause property
damage, injury or death. Read the installation,
operation, and maintenance instructions thoroughly
before installing or servicing this equipment.
Table of Contents
Installation and Operation ........................ Paragraph 1-24 ...... Pages 1-19
Check Installation and Start-Up ................. Paragraph 25 ........... Page 20
Optional Equipment .................................. Paragraph 26-32 .... Pages 21-23
Service/Maintenance/Troubleshooting ... Paragraph 33-43 .... Pages 23-28
FOR YOUR SAFETY
If you smell gas:
1. Open windows.
2. Don't touch electrical switches.
3. Extinguish any open flame.
4. Immediately call your gas supplier.
FOR YOUR SAFETY
The use and storage of gasoline or other
flammable vapors and liquids in open
containers in the vicinity of this appliance is
hazardous.
WARNING: Gas-fired appliances are not
designed for use in hazardous atmospheres
containing flammable vapors or combustible
dust, in atmospheres containing chlorinated
or halogenated hydrocarbons, or in appli-
cations with airborne silicone substances. See
Hazard Levels, Page 2.
INSTALLATION FORM RZ-NA-I-FE/BE
Obsoletes RGM 436 (Version B)
APPLIES TO: Installation/Operation/Service
Model FE and BE
Gas-Fired, Power-Vented
Unit Heaters
Model
FE
Model
BE
Model Fuel Vent Air Delivery
FE Gas-Fired Power Propeller Fan
BE Gas-Fired Power
Centrifugal Blower (heater may
be attached to ductwork)
REFERENCES: Replacement Parts, Form RZ-NA 726
Gas Conversion, Form RZ-NA 434/436-GC
®