RED DSMC FAN 2.0 UPGRADE - Manual (Page 9)

DSMC FAN 2.0 UPGRADE INSTRUCTIONS
COPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 9
5. Remove the fan grill by rotating it upward, using the ESD-safe solder stick (included) for assistance if nec-
essary.
6. Pinch the upper right and lower left corners of the current fan assembly.
NOTE: In the next step, DO NOT pull out the connector, or damage will occur.
7. While continuing to hold the upper right and lower left corners of the current fan assembly, wiggle and pull
the fan assembly back-and-forth until it releases from the DSMC BRAIN.
Remove Grill
Pinch Fan Corners