Adjust fan settings, Dsmc fan 2.0 upgrade instructions – RED DSMC FAN 2.0 UPGRADE User Manual
Page 27
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
COPYRIGHT © 2014 RED.COM, INC
955-0012, REV-D
|
27
ADJUST FAN SETTINGS
After installing the 2.0 fans and performing other necessary operations, adjust your fan settings to account for
the new top fan (if applicable), the increased speed of the bottom fan, and the new fan mode settings that are
available in firmware v4.0.12 and later.
NOTE: The instructions below are specific to firmware version v4.0.12.
1. Turn on your DSMC BRAIN.
2. Navigate to Menu > Settings > Setup > System > Fan Control.
3. Adjust the fan settings to meet your personal preferences or the needs of your project.
NOTE: For more information on upgrading your DSMC firmware, refer to the
online
at
Adjust Fan Settings