RED DSMC FAN 2.0 UPGRADE - Manual (Page 17)

DSMC FAN 2.0 UPGRADE INSTRUCTIONS
COPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 17
6. Remove the exhaust fan pogo cover.
NOTE: Store the exhaust fan pogo cover and the two (2) M2x0.4 x 4 mm cap screws in a safe place, in case
you want to remove or replace the top fans at a later time.
INSTALL TOP FAN AND TOP VENT SCOOP
1. Place the top fan assembly on top of the vent so that the “RED PRO” lettering is facing up and the con-
nector is facing down.
Remove Cover
Align Top Fan