RED DSMC FAN 2.0 UPGRADE - Manual (Page 15)

DSMC FAN 2.0 UPGRADE INSTRUCTIONS
COPYRIGHT © 2014 RED.COM, INC 955-0012, REV-D | 15
INSTALL TOP FAN WITH TOP VENT SCOOP
REQUIRED TOOLS
T8 Torx driver
T6 Torx driver (included)
REMOVE TOP VENT SCOOP
1. Turn off the DSMC and remove all power supplies, DSMC accessories, and the lens.
2. Place the DSMC BRAIN on a suitable flat work surface with the top of the DSMC facing upward.
3. Use a T8 Torx driver to remove the four (4) M2.5x0.45 x 6 mm cap screws that attach the top vent scoop
to the DSMC BRAIN.
Remove Cap Screws