Upgrade bottom fan, Required tools, Remove current bottom fan – RED DSMC FAN 2.0 UPGRADE User Manual

Page 8: Dsmc fan 2.0 upgrade instructions

Text mode
Original mode

DSMC FAN 2.0 UPGRADE INSTRUCTIONS

955-0012, REV-D

REQUIRED TOOLS

T10 Torx driver

ESD-safe solder stick (included)

REMOVE CURRENT BOTTOM FAN

1. Turn off the DSMC and remove all power sources, DSMC accessories, the lens, and the lens mount.
2. Cover the camera opening with a DSMC Front Body Cap to protect your sensor from dust and foreign par-

ticles during the fan upgrade procedure.

3. Place the DSMC BRAIN on a suitable flat work surface with the front of the DSMC facing upward.
4. Use a T10 Torx driver to remove the two (2) M3x0.5 x 6 mm cap screws that attach the current fan grill to

the DSMC BRAIN.

Remove Cap Screws

UPGRADE

BOTTOM FAN