RED DSMC FAN 2.0 UPGRADE - Manual (Page 20)

COPYRIGHT © 2014 RED.COM, INC
DSMC FAN 2.0 UPGRADE INSTRUCTIONS
955-0012, REV-D | 20
INSTALL TOP FAN WITH DSMC TACTICAL TOP PLATE
REQUIRED TOOLS
T6 Torx driver (included)
3/16 inch Allen wrench
3mm Allen wrench
REMOVE DSMC TACTICAL TOP PLATE
1. Turn off the DSMC and remove all power supplies, DSMC accessories, and the lens.
2. Place the DSMC BRAIN on a suitable flat work surface with the top of the DSMC facing upward.
3. Use a 3mm Allen wrench to loosen the four (4) M4 captive screws by at least two (2) full turns.
4. Use a 3/16 Allen wrench to loosen the two (2) 1/4-20 screws.
5. Continue to loosen all screws until the plate can be removed.
Loosen M4 Screws