Timing channels, Channel functions, Timing channel mapping – PRG Bad Boy User Manual 1.6 User Manual
Page 54: Channel functions timing channel mapping
46
BAD BOY
®
SPOT LUMINAIRE USER MANUAL
Timing Channels
Channel Functions
Timing channel control improves the timed moves of certain groups of parameters. Three timing channels are
provided: one for Focus (Pan and Tilt), one for color parameters and one for beam parameters. Timing channels
support time values of up to six minutes.
Timing Channel Mapping
Refer to the Timing Channels Table starting on the next page. The following guidelines apply:
+
A timing value of zero is full speed.
+
A time value of 100% (or 255 in DMX) causes the associated parameter(s) to follow cue fade time (console time)
rather than the timing channel.
+
Timing channels can be set in either % or 0-255 (DMX) modes, with the values assigned - as shown in the tables.
Table 3-7: Channel Function / Timing Channel Relationship
Bad Boy
Channel Function
Timing Channel
Focus Time
Color Time
Beam Time
Pan
Tilt
Cyan
Yellow
Magenta
Color Wheel
Beam
Frost
Rotating Gobo Wheels 1 & 2
Gobo Index 1 & 2