PRG Bad Boy User Manual 1.6 - Manual (Page 44)

36 BAD BOY ® SPOT LUMINAIRE USER MANUAL
Menu System Overview
The menu system consists of a hierarchy of menu
levels as shown in Figure 3-3. Sub-menus,
options, and alpha/numeric keypads may be
accessed by pressing the blue and red areas of
these main screens. Pressing EXIT will return to
the previous screen.
When power is applied to the luminaire, the Menu
Touchscreen will display an initialization screen
during calibration. After calibration is complete,
the Home screen will be displayed. Refer to
"Menu Details" on page 37 for an in-depth
explanation of each menu screen and its
functions.
Pan/Tilt
- Invert Pan
- Invert Tilt
- Swap Pan/Tilt
- Free
- Lock Pan
- Lock Tilt
Recalibrate
- ALL
- Pan/Tilt
- Zoom
- Colors
- Gobos
- Dimmer/Strobe
Disable
- ALL
- Pan/Tilt
- Zoom
- Wheels
Mech Tests
- Pan
- Tilt
- Dimmer
- Strobe
- Cyan
- Yellow
- Magenta
- Designer
- Gobo 1
- Index 1
- Gobo 2
- Index 2
- Zoom
- Iris
- Frost
Home
- Lamp
- Config
- Info
- Test
- Comm
- Status
Lamp
- Lamp Hours
- Strikes
- Maximum Power
- Power On
- Start/Douse
- Temperature
- Fans
Configuration (Config)
- Display
- Reset Defaults
- Pan/Tilt
- Zoom Fast/Focus
- DMX/ETH Address
- Universe
- Universe Format
Information (Info)
- Run Time
- Software Version
- Fixture Hours
- Crossload SW
Test
- Re-Calibrate
- Re-Calibrate ALL
- Disable
- Mechanical Test
- Clean Lenses
- Group Test
Communication (Comm)
- Control
- Info
Status
- Mechanisms
- Log
Figure 3-3: Menu System Overview