Pan/tilt screen, Information screen, Pan/tilt screen information screen – PRG Bad Boy User Manual 1.6 User Manual
Page 47
BAD BOY
®
SPOT LUMINAIRE USER MANUAL
39
Default Settings:
Pan/Tilt Screen
+
Invert Pan / Invert Tilt - displays current invert settings. Press to bring up Invert
Yes/No options. When inverted, pan/tilt will move in the opposite direction.
+
Swap - displays current swap setting. Press to bring up Swap Pan/Tilt Yes/No
options. When swapped, the pan channel will control tilt and vice versa.
+
Free - displays the current "free" setting. Press to bring up Yes/No options. Yes
will enable "free" control, which allows the luminaire to be used as a follow spot.
(Also refer to
+
Lock Pan/Tilt - displays current lock setting. Press to bring up Lock Yes/No
options. When locked, mechanism will not release brake or calibrate, only remain
in its fixed position.
Press EXIT to return to
.
Note: Pan/Tilt will default to its last setting.
Information Screen
+
Run Time - displays current run time in
hours:minutes
format.
+
Software Version - displays software date and time stamp, and software version
name.
+
Fixture Hours - displays total number of hours that the fixture has been
operated.
+
Crossload SW - allows the luminaire to send its software version out over the
DMX512 and Ethernet lines to other connected luminaires in the daisy-chain. (See
on page 60 for more explanation of this function.)
Press EXIT to return to
.
+
Address: 001
+
Universe: A
+
Universe Setting: alpha
+
P/T: unlocked
+
P/T: standard
(not inverted or swapped)
+
Lamp Setting: 1400W
+
Lamp Power Up: wait
+
Zoom: normal
+
Display: auto
Pan/Tilt Screen
Information Screen