PRG Bad Boy User Manual 1.6 User Manual
Page 29
BAD BOY
®
SPOT LUMINAIRE USER MANUAL
21
Step
6. Feed safety cables through mounting bracket slots and secure around pipe.
Step
7. Connect power and data cables according to
Figure 2-7: Vertical "Yoke Out" Hanging Configuration
Remove Luminaire From Case
Attach to Vertical Truss
Vertical
Truss
Display
UP
b) Using a third person,
secure in place by
tightening Truss Hook
wing bolts.
a) Using two people, carefully lift
luminaire into mounting position so that
display is facing downward
.
Wing Bolt
1
2
Vertical
Truss