PRG Bad Boy User Manual 1.6 - Manual (Page 49)

BAD BOY ® SPOT LUMINAIRE USER MANUAL 41
Test Screen
+ Re-Cal - press to bring up Recalibration Screen. (During recalibration, intensity
goes out until all mechanism calibrations are complete and back in position, then
fades in.)
+ Re-Call ALL - press to bring up Re-Cal ALL Yes/No options.
+ Disable - press to bring up Disable Screen.
+ Mech Test - press to bring up Mechanical Test Screen. (See "Mechanical Test" on
page 57 for more explanation of this screen.)
+ Clean Lenses - press to position lenses so that all surfaces may be cleaned with
a cloth. (Note that pressing the button does not actually clean the lenses.)
+ Group Test - allows multiple Bad Boy luminaires to be run through a configurable
test sequence when chained together via DMX512 or Ethernet. (See
"Group Test"
on page 58 for more explanation of this screen.)
Press EXIT to return to Home Screen .
Test Screen
Test Sub-Menu Screens