Starting the lamp – PRG Bad Boy User Manual 1.6 User Manual
Page 37
BAD BOY
®
SPOT LUMINAIRE USER MANUAL
29
Starting the Lamp
The lamp can be started (turned on) via console command or at the luminaire itself by using the Menu Touchscreen.
To start lamp using Menu Touchscreen:
Step
1. At Home screen, press LAMP panel.
Step
2. At Lamp screen, current lamp status (ON/OFF) will be displayed. Press START to bring up YES/NO options.
Figure 2-16: Starting the Lamp
Step
3. Press YES to start lamp.
Lamp Operation Settings
The luminaire can also be configured to power up with its lamp on or off, and the maximum lamp power level can be
set via the Lamp screen. For details about all lamp configuration options, refer to
Lamp Warm-Up
By default, the lamp is configured for a 3 minute warm-up period at 1200W or less. To override this setting, use the
control channel options (refer to