Canon FAX-L400 - Manual (Page 94)

10-7
2.FAX/TEL OPT. SET When FaxTel has been set, the optional settings are
available.
1.RING START TIME Sets the duration that the machine listens for a fax tone
before starting to ring.
00
to 30SEC
2.F/T RING TIME Sets the length of time the machine rings to alert you of
an incoming call.
010
to 060SEC
3.F/T SWITCH ACTION Selects the action taken after the F/T RING TIME
expires.
RECEIVE The machine switches to the fax receive mode
automatically at this point and starts to receive the
document.
DISCONNECT The machine disconnects the call.
3.INCOMING RING Sets whether the machine rings when it receives a call
when the machine is set to FaxOnly.
OFF The machine does not ring when it receives a fax. (In
Energy Saver mode, the fax may ring one or two times.)
ON The machine rings when it receives a fax if a telephone is
connected.
RING COUNT Sets the number of incoming rings before the machine
answers.
01
to 99TIMES
4.MAN/AUTO SWITCH Sets whether the machine switches to document receive
mode after ringing for a specified length of time in the
manual receive mode.
OFF The machine keeps ringing until someone answers the
call manually with a connected extension telephone.
ON The machine switches to document receive mode after
ringing for a specified time.
F/T RING TIME Sets the length of time to elapse before the machine
switches to the document receiving.
01
to 99SEC
5.REMOTE RX Enables/disables remote receiving. (
→ p. 5-5)
ON The machine enables remote receiving.
REMOTE RX ID You can dial code on the remote extension to start
receiving a document.
A combination of two characters using 0 to 9,
T T and #
(25) is possible.
OFF The machine disables remote receiving.
10
Setting the Additional Functions
Name Descriptions