Canon FAX-L400 - Manual (Page 92)

10-5
10
Setting the Additional Functions
6.R-KEY SETTING The R-KEY setting allows you to set how the fax
connects to PBX. If your fax machine is not connected
through a PBX, you can ignore these settings.
PSTN The fax is connected to the outside line.
PBX The fax is connected through a PBX. Select one of the
following settings, depending on the type of PBX in
service. Two settings are available:
HOOKING
PREFIX
If you select PREFIX, you can
set a number up to 20 digits long,
including the “P” at the end.
(
→ p. 2-10)
REPORT SETTINGS Sets the report setting.
1.TX REPORT Enables/disables automatic printing of a transmission
report.
OUTPUT NO No report is printed.
PRINT ERROR ONLY Prints a report only when a transmission error occurs.
REPORT WITH TX IMAGE Enables/disables printing of the first page of the fax
under the report.
ON Prints the first page.
OFF No first page is printed.
OUTPUT YES Prints a report every time you send a document.
REPORT WITH TX IMAGE Enables/disables printing of the first page of the fax
under the report.
ON Prints the first page.
OFF No first page is printed.
2.RX REPORT Enables/disables automatic printing of a reception report.
OUTPUT NO No report is printed.
PRINT ERROR ONLY Prints a report only when a reception error occurs.
OUTPUT YES Prints a report every time you receive a document.
3.ACTIVITY REPORT Enables/disables automatic printing of an ACTIVITY
REPORT after every 20 transactions.
ON Prints the ACTIVITY REPORT.
OFF No ACTIVITY REPORT is printed.
Name Descriptions