Canon FAX-L400 - Manual (Page 91)

10-4
FAX SETTINGS
USER SETTINGS The basic operation settings in the Fax mode can be
specified.
1.TEL LINE SETTINGS Specify the telephone line settings.
1.USER TEL NO. Your telephone and fax number can be registered within
20 digits, including spaces.(
→ p. 2-6)
2.TEL LINE TYPE Selects the telephone line type. (
→ p. 2-8)
TOUCH TONE The telephone line is set for touch tone dialling.
ROTARY PULSE The telephone line is set for rotary pulse dialling.
3.TX START SPEED Sets the transmission speed for all documents you send.
33600bps
/14400bps/9600bps/7200bps/
4800bps /2400bps
4.RX START SPEED Sets the transmission speed for all documents you receive.
33600bps
/14400bps/9600bps/7200bps/
4800bps /2400bps
2.UNIT NAME You can register your name or your company name
within 24 characters, including spaces. (
→ p. 2-6)
3.TX TERMINAL ID Prints your ID (Transmitting Terminal ID) on each page
you transmit. (
→ p. 2-4)
ON After you turn the terminal ID on, you can do the
following settings.
1.TTI POSITION OUTSIDE IMAGE : Terminal ID is printed outside the
image border.
INSIDE IMAGE
: Terminal ID is printed inside the image
border.
2.TEL NUMBER MARK Selects the prefix for the identification header number.
FAX
, TEL
OFF No terminal ID is printed on the pages you send.
4.DENSITY CONTROL Sets the density of the documents. Nine levels of the
density are provided.
1.LIGHT Sets for dark documents.
The density suitable for dark documents can be adjusted
with four levels.
2.STANDARD Sets for standard documents. The density suitable for
standard documents can be adjusted with three levels.
3.DARK Sets for light documents. The density suitable for light
documents can be adjusted with four levels.
5.OFFHOOK ALARM Enables/disables the offhook alarm that alerts you when
the handset is not in the handset cradle.
ON After reception, the offhook alarm sounds when the
handset of extension telephone is left off the hook.
OFF No offhook alarm.
Name Descriptions